Alaabta
SFG Qalabka Daabacaha ee Tooska ah ee Alxanka A5
Tilmaamaha
| Qaabka | A5 | ||
| Shayga | |||
| Sawirada Shaashada | Inta ugu yar | 470×370mm | |
| Cabirka ugu badan | 737×737mm | ||
| Dhumucda | 25-40mm | ||
| PCB Min Cabirka | 50×50mm | ||
| Cabbirka ugu badan ee PCB | 400×340mm | ||
| Dhumucda PCB | 0.4 ~ 6mm | ||
| PCB Warpage | <1% | ||
| Dhererka Gaadiidka | 900± 40mm | ||
| Jihada gaadiidka | Bidix-Midig;Midig-Bidix;Bidix-Bidix;Midig-Midig | ||
| Xawaaraha gaadiidka | Ugu badnaan 1500mm/s (Programmable) | ||
| Goobta Guddiga | Nidaamka Taageerada | Miis biin/kor-sare ah | |
Halbeegga
| PCB The meelaynta | xannibaad la hagaajiyay/taageeray | |
| Nidaamka Isku-qabsiga | Isku-qabsiga dhinaca, vacuum nozzle | |
| Madaxa daabacaadda | Laba madax daabac oo matoor ah oo madax banaan | |
| Xawaaraha Squeegee | 6 ~ 200mm/sek | |
| Cadaadiska Squeegee | 0-15kg | |
| Squeegee Angel | 60°/55°/45° | |
| Nooca Squeegee | Birta aan la taaban karin (standard), caag ah | |
| Xawaaraha kala saarida Stencil | 0.1 ~ 20mm / sec | |
| Nidaamka Nadiifinta | Qalalan, Qoyan, Vacuum (Barnaamij la samayn karo) | |
| Heerarka Hagaajinta Miiska | X:±10mm;Y:±10mm;θ:±2° | |
| Mashiinka | ||
| Ku celi saxnaanta booska | ±0.01mm | |
| Saxnaanta Daabacaadda | ± 0.025mm | |
| Waqtiga Wareegga | <7s (Ka Reebo Daabacaadda & Nadiifinta) | |
| Beddelka Alaabta | <5min | |
| Hawada Loo Baahan Yahay | 4.5-6kg/cm2 | |
| Galinta Awoodda | AC:220±10%,50/60HZ1F3KW | |
| Habka xakamaynta | Kontoroolka PC | |
| Cabirka Mashiinka | 1220 (L) × 1355 (W) × 1500 (H) mm | |
| Miisaanka mashiinka | Qiyaastii: 1000kg | |
Hordhac
● Nidaamka xoqitaanka
Nooca buundada qaansada oo laalida xoqida tooska ah ee madaxa daabaca leh borogaramamka iyo hakinta is-hagaajinta jaranjarada jaranjarada. madaxyada waxaa u kala horreeyaan laba matoorada saxda ah ee saxda ah, hubinta saxnaanta iyo xasiloonida cadaadiska. Nidaamka xakamaynta cadaadiska xiran ayaa si sax ah u ogaan kara oo u xakameyn kara cadaadiska squeegee inta lagu jiro wax soo saarka waqtiga dhabta ah.
● Sawirka iyo Nidaamka indhaha
Iftiinka giraanta lebbiska ah, iftiinka coaxial ee dhalaalkiisu sareeyo iyo nidaamka aragga sare/hooseeya oo dhammaystiran oo magdhow iftiin ah, Si toos ah oo sax ah loo aqoonsaday dhammaan noocyada calaamdaha.Lagu dabaqi karo dahaadhinta daasadda, dahaadhka naxaasta, dahaadhka dahabka, buufinta daasadaha,FPC iyo noocyada kale ee PCB oo leh midabo kala duwan, awood si loo hubiyo saxsanaan sare.
● Nidaamka Nadiifinta
Nidaamka nadiifinta Stencil waa si toos ah oo waxtar leh.Saddexda doorasho ee nadiifinta qallalan, nadiifinta qoyan iyo faakuumaynta ayaa loo dooran karaa in la isticmaalo, labadaba si gaar ah iyo si dhufasho ah.Waxa kale oo aad dooran kartaa in aad gacanta ku disho Shaqada software waxay xakameyn kartaa qiyaasta khamriga iyo warqad nadiifinta stencil, si wax ku ool ah u badbaadi isticmaalka badan. Nadiifinta faakuumka waxaa lagu taageeraa taageere u go'an, awood leh oo waxtar leh.
● Nidaamka Qalabaynta Platform ee Saxda ah ee Saxda ah
Isku xirka seddexda faasas waxaa loogu talagalay sifooyin firfircoon oo aad u sarreeya.lt si dhakhso ah ayuu u hagaajin karaa dhererka xiritaanka PIN ee PCB oo leh dhumuc kala duwan.
● Interface-ka hawlgalka
Isticmaalka interface-ka hawlgalka Windows XP, oo ay fududahay in wax lagu barto isticmaalayaasha, oo leh fikradda is-dhexgalka ee wanaagsan-mashiinka.Programi ng waxa loo qaabeeyey shaqo bariis iyo hagitaan, hagitaan ayaa laga heli karaa tillaabo kasta.
● Imtixaanka Tayada Daabacaadda 2D Paste iyo Falanqaynta
Hubi tayada daabacaadda alaabta, sifadaani waxay si dhakhso ah u ogaan kartaa debcinta daabacaadda, koollada aan ku filnayn, maqan iyo buundada iyo cilladaha.
